Metal cans can be used in the manufacture of, for example, small boxes, baskets, paper and many other useful things. But who would have thought, looking at the picture that this lamp is also made of cans. If you want to have around like a lamp, proceed to its construction."/>
Приветствую Вас, Гость
Главная » Статьи » Культура » Дизайн

How to make a lamp shade for a lamp with his hands


Metal cans can be used in the manufacture of, for example, small boxes, baskets, paper and many other useful things. But who would have thought, looking at the picture that this lamp is also made of cans. If you want to have around like a lamp, proceed to its construction.

Four legs (a) and carrying crossbar (a) fabricate wooden bars of 30x5 mm (assembly circuit crosses shown in the figures).

Attach the feet to the cross piece to glue PVA and obtyanite tape. Circle (s) cut from chipboard and in the middle drill a small hole for the cable.

When assembling the screw to the base circle of the cartridge. In the frame of a lampshade cut holes with different diameters.

On the lower edges of the frame make four slits (d), the width of which shall be equal to the thickness of bars crossing (s).

Attach to the frame material stitched with double sided tape along the upper and lower edges of the frame. Place one strip strip vertically in the area of ​​the junction material.

Then pull on the frame material. Close the top opening of the lampshade in the same material but with the lining of the drawing paper. Edges obtyazhek glue with white glue. The upper edge of the lampshade chains decorativ material.




Источник: How to make a lamp shade for a lamp with his hands
Категория: Дизайн | Добавил: Zixerok (27.10.2011)
Просмотров: 538 | Теги: Shade, lamp | Рейтинг: 0.0/0
Всего комментариев: 0
Имя *:
Email *:
Код *: