This decorative and original lighting make your hands very easily. You need to have a thin paper, printer, wire, tall round glass candle, and a couple of tools."/>
Приветствую Вас, Гость
Главная » Статьи » Домашний очаг » Дизайн

Make a decorative lamp shade and with his own hands


This decorative and original lighting make your hands very easily.
You need to have a thin paper, printer, wire, tall round glass candle, and a couple of tools.

Design lamp can be changed at any time, whenever you want.
Or when tired, the glass can be used for its intended purpose.

These lamps can decorate the house and create a cozy romantic atmosphere.


What you need to make these lights?

    
Thin translucent paper (vellum)
    
Narrow and tall glasses, preferably cut and straight.
    
Small candles
    
Steel wire 1-2mm in diameter, brass or copper wire.
    
Adhesive tape (Scotch).

Tools:

    
Stationery knife
    
Pencil
    
Pliers
    
Laser printer connected to your PC
    
The program for graphics



For the manufacture of the lamp, we need paper, tape, printer, pencil, glass, candle and provolokaIzgibaem wire for holding candles

Bend the wire as shown in the picture with your hands or pliers.

If desired, the top of the wire can make a ball (made of polymer clay, or even of any material, for example Polymorphus).



candle lamp for your rukamistakan use as a framework for the light
Measurements of the glass beaker, creating a picture and print on paper

Make a cup measurements as follows:

    
The circle in the upper part
    
The circle on the bottom
    
The height of the cup.
    
All sizes to add 5 mm to be safe.



remove dimensions from stakanarisuem shade for the lamp in a graphical program

For the manufacture of the lamp shade using a graphics editor, Gimp, OpenOffice Draw, Inkscape, or Photoshop.

In the editor create a trapezoid, according to our size. Making the background fill color of black or dark, to impose a background picture, drawing or pattern. It all depends on your taste and imagination.

print out lists - the future shade svetilnikaobrezaem edges



To print on tracing paper is best to use a laser printer because inkjet paper will skamkivatsya, and the black ink runs out quickly.

After printing out the sheets, the edges should be cut as shown.
Cut off the bottom side, and one vertical.



Wrap glass unsealed abazhuromdelaem second light from the glass and paper

Vertically to the paper stick tape and wrap it up glass, butted at the edges. Excess paper should be cut.

Cut the paper into a makeshift svetilnikeObrezaem paper on a makeshift lamp



Upon heating tape may peel off. Therefore, the edges of the paper in place joint can drip a few drops of glue.

The lamp is ready!

With pick holder candle, light it and drop back to the "light".

Lamp with his hands out of the glass, paper and svechkiSvetilnik their hands out of the glass, paper and candles

Lamp with his hands out of the glass, paper and svechkiSvetilnik their hands out of the glass, paper and candles

Observe safety rules do not place such fixtures in the near inflammables!


Источник: Make a decorative lamp shade and with his own hands
Категория: Дизайн | Добавил: Zixerok (27.10.2011)
Просмотров: 1015 | Теги: decorative, Shade | Рейтинг: 0.0/0
Всего комментариев: 0
Имя *:
Email *:
Код *: